Citroen Xantia

1. The drive of the water pump is carried out by a gas-distributing belt. The pump приболчен to the block of cylinders from GRM drive.
2. Empty cooling system (address to Head Routine maintenance).
3. Remove a belt of a drive of GRM (see. Head engine Repair).

4. Turn out fixing bolts and take pump assembly from the block of cylinders (optimum access opens through a wheel arch). Remove sealing laying.

1. Make sure of absoluteness of purity and dryness of interfaced surfaces of the pump and the block of cylinders.
2. Establish the pump on the regular place (do not forget to replace laying).
3. Establish a belt of a drive of GRM (see appropriate section of Head engine Repair).
4. Fill cooling system (address to Head Routine maintenance).