Citroen Xantia

since 1993 of release

Repair and car operation

Citroen Xantia
+ Introduction
+ Operation manual
+ Routine maintenance
+ engine Repair
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Coupling
+ Transmission
+ Power shafts
- Uniform hydraulic system
   General information and precautionary measures
   Сбрасывание / forcing of hydraulic pressure and system filling
   The pump of a high pressure - general information, removal and installation
   Regulator of hydraulic pressure - general information, removal and installation
   The tank of hydraulic liquid - general information, removal and installation
   Receivers of hydraulic liquid - general information, removal and installation
+ Brake system
+ Running gear and steering
+ Body and salon furnish
+ Onboard electric equipment
+ electric equipment Schemes

��: https://aqua52.ru|�� : https://furycoins.ru

Uniform hydraulic system

Specifications

Hydraulic pump

Type	The piston
Number of pistons	6
Working number of turns	Half of number of turns of the engine
Productivity on one turn, cm³	3.3

Pressure regulator

Pressure of shutdown, bar	170± 5
Pressure of inclusion, bar	145± 5
Thickness of an adjusting washer of pressure of inclusion, mm	0.30 and 0.70
Thickness of an adjusting washer of pressure of shutdown, mm	0.30
Control pressure	bar
Adjusting washer of 0.30 mm	3
Adjusting washer of 0.70 mm	7

Main hydraulic accumulator

Volume of filling, l	0.4
Tarirovochnoye pressure, bar	62

Safety valve

Pressure of shutdown of a suspension bracket, bar	Not below 80
Pressure of inclusion of a suspension bracket, bar	Not above 100
Thickness of an adjusting washer, mm	0.9

Tank

Volume of filling, l	5.4
Type of hydraulic liquid	LHM PLUS (green color)

Efforts of a tightening of carving connections, Nanometer

Shtutsernye of connection of hydraulic tubes
Tubes in diameter of 3.5 and 4.5 mm	8
Tubes in diameter of 6.35 mm
• With the sealing coupling	10
• Without the sealing coupling	13
Tubes in diameter of 10 mm	30