Citroen Xantia

since 1993 of release

Repair and car operation

Citroen Xantia
+ Introduction
+ Operation manual
+ Routine maintenance
+ engine Repair
+ Systems of cooling, heating
- Power supply system and release
   - Power supply system - petrol models
      Removal and installation of assembly of an air purifier
      Removal, installation and adjustment of a cable of gas
      Removal and installation of a pedal of gas
      Unleaded fuel - the general information and use rules
      Systems of injection of fuel - the general information
      Sbrasyvaniye of pressure in a power supply system
      Removal and installation of the fuel pump
      Removal and installation of the sensor of fuel consumption
      Removal and installation of a fuel tank
      Check of a condition and adjustment of system of injection of fuel
      Removal and installation of the case of a throttle
      Removal and installation of components of Bosch Motronic 5.1 system
      Removal and installation of components of Magneti-Marelli 8Р system
      Removal and installation of the inlet pipeline
      Removal and installation of a final collector
   + the Power supply system - diesel models
   + Systems of decrease in toxicity and production of the fulfilled gases
+ engine Electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Uniform hydraulic system
+ Brake system
+ Running gear and steering
+ Body and salon furnish
+ Onboard electric equipment
+ electric equipment Schemes

Explore different genres, from action-packed thrillers to heartwarming dramas, on Soap2day.

Removal and installation of a pedal of gas

Removal

PERFORMANCE ORDER

1. Disconnect a cable of gas of a pedal (see. Removal, installation and adjustment of a cable of gas).
2. Remove a lock ring from one of the ends of an axis of a pedal of gas.
3. Take an axis and remove a pedal from an arm assembled with axial plugs.
4. Check a condition of plugs and an axis, defective components replace.

Installation

Installation is made upside-down. It is necessary to grease axial assembly with universal greasing previously. In summary make adjustment of a cable of gas (see. Removal, installation and adjustment of a cable of gas).