Citroen Xantia

since 1993 of release

Repair and car operation



Citroen Xantia
+ Introduction
+ Operation manual
+ Routine maintenance
+ engine Repair
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Uniform hydraulic system
+ Brake system
+ Running gear and steering
+ Body and salon furnish
- Onboard electric equipment
   Search of causes of failures of electric equipment
   Safety locks and the relay - the general information
   Removal and installation of switches
   Replacement of lamps of external lighting and alarm devices
   Replacement of lamps of internal lighting devices
   Removal and installation of external lighting and alarm devices
   Adjustment of optical axes of head headlights
   Removal and installation of an instrument guard
   Removal and installation of components of an instrument guard
   Removal and installation of hours
   Removal and lighter installation
   Alarm system “do not forget to switch off lighting devices” - the general information
   Removal and installation of a horn of a horn
   Removal and installation of a driving cable of the speedometer/sensor of speed
   Removal and installation of the lever of a screen wiper
   Removal and installation of the electromotor and drafts of a drive of a cleaner of a windscreen
   Removal and installation of the electromotor of a drive of a back screen wiper
   Removal and installation of components of system of washing of glasses and lenses of head block headlights
   Removal and radio tape recorder installation
   Removal and installation of loudspeakers
   Removal and installation of the aerial of a radio receiver
   Anticreeping system - the general information
   Safety cushion - the general information, precautionary measures and system deactivation
   Removal and installation of components of a safety cushion
   Diagnostics of systems of electronic control
+ electric equipment Schemes


ad6e8668

Removal and installation of the lever of a screen wiper

Removal

 PERFORMANCE ORDER

1. Include a screen wiper and at once switch off it, having made sure of return of the lever to parking situation.
2. Paste on glass adhesive tape pieces, having marked a starting position of a brush.

3. Remove a protective cap and weaken a shpindelny nut of the lever. Pay attention that at removal of the lever of a cleaner of back glass before giving a nut, it is necessary to disconnect the socket of a hose of supply of washing liquid from a spindle. Take away a brush from glass and remove the screen wiper lever from a spindle. In case of need hook the lever a screw-driver with a flat sting.

Installation

 PERFORMANCE ORDER

1. Make sure of purity and dryness шлицов a spindle, then plant on them the lever, having tracked that the brush took place on glass according to the labels put in the course of dismantle.
2. Screw a shpindelny nut and strongly tighten it. Do not forget to establish a protective cap.