Citroen Xantia

since 1993 of release

Repair and car operation



Citroen Xantia
+ Introduction
+ Operation manual
- Routine maintenance
   + Weekly checks
   - Routine maintenance of the car - petrol models
      Regular service
      Replacement of impellent oil and oil filter
      Check of a condition of hoses, and identification of sources of leaks
      Check of adjustment of coupling
      Check of level of ATF
      Suspension bracket and steering drive
      Check of a condition of protective covers of power shafts
      Reading of memory of the block of self-diagnostics
      Replacement of the dust removal filter (model with To/in)
      Check of a condition of a coolant of central air of air
      Replacement of spark plugs
      Check of a condition of system of ignition
      Check and adjustment of turns and quality of a mix of idling
      Check of serviceability of functioning of systems of decrease in toxicity of the fulfilled gases
      Check of a condition and replacement of a belt of a drive of auxiliary units
      Greasing of the mechanism of a drive of switching off of coupling
      Check of a condition of blocks of brake mechanisms of lobbies and back wheels
      Check of serviceability of functioning and adjustment of the parking brake
      Trial runs
      AT transmission liquid replacement
      Greasing of locks and loops
      Replacement of a filtering element of an air purifier
      Check of level of transmission oil (model with RKPP)
      Replacement of the fuel filter
      Replacement of hydraulic LHM liquid and returnable filter
      Check of a condition of brake supports, disks and hydraulic hoses
      Replacement of a belt of a drive of GRM
      Replacement of cooling liquid
   + Routine maintenance of the car - diesel models
+ engine Repair
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Uniform hydraulic system
+ Brake system
+ Running gear and steering
+ Body and salon furnish
+ Onboard electric equipment
+ electric equipment Schemes


ad6e8668

Check and adjustment of turns and quality of a mix of idling

THROUGH EACH 30 000 KM (18 000 MILES) RUN

 PERFORMANCE ORDER

1. Before starting installation of turns and qualities of a mix of idling execute the following preparatory procedures:
   -  Check a condition of spark plugs size of interelectrode gaps (see. Replacement of spark plugs);
   -  Check correctness of adjustment of a cable of an accelerator (see. A power supply system - petrol models);
   -  Check a condition and reliability of connection of ventilating hoses of a case of the engine (see. Check of serviceability of functioning of systems of decrease in toxicity of the fulfilled gases);
   -  Check a condition of a filtering element of an air purifier (see. Replacement of a filtering element of an air purifier);
   -  Check a condition of components of system of production of the fulfilled gases (see. Systems of decrease in toxicity and production of the fulfilled gases);
   -  If violation of stability of turns of the engine takes place, check kompressionny pressure in cylinders and klapanny gaps (see. The repair procedures which are not demanding extraction of the engine from the car - petrol engines);
   -  Make sure that the control lamp of system of injection of fuel/ignition is disconnected (see. A power supply system - petrol models).
2. Make on the car a short trip during which the engine should be heated-up to normal working temperature.

Adjustment should be made within the first two minutes after return from a trip (do not suppress the engine). Wait shutdowns of the fan of system of cooling. having several times lifted engine turns to value of 2000 rpm, remove excess of fuel of their inlet pipeline, then again dump turns to the single.

3. Rather skilled amateur mechanic, having the necessary equipment (a qualitative tachometer and accurately otkalibrovanny gas analyzer) in a condition own forces to execute verification of the content in the fulfilled gases of monooxide of carbon (WITH). However, in case of detection of surplus WITH, the car should be driven away for adjustment on car repair shop.
4. On the models equipped with a control system of the Magneti-Marelli engine adjustment of quality of a mix of idling (contents level WITH in the fulfilled gases) it can be executed only by a way of reprogramming of ECU of a control system with use of the special electronic equipment connected to the diagnostic socket (see. A power supply system - petrol models).
5. On all other models this adjustment is not provided and its performance is not obviously possible. The deviation of under control parameters (turns of idling and concentration WITH in the fulfilled gases) from norm testifies to violation of serviceability of functioning of a control system by the engine. In this case the car should be driven away for performance of more detailed diagnostics and necessary repair on car repair shop (see. A power supply system - petrol models).