Citroen Xantia

since 1993 of release

Repair and car operation



Citroen Xantia
+ Introduction
+ Operation manual
+ Routine maintenance
+ engine Repair
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Uniform hydraulic system
+ Brake system
+ Running gear and steering
- Body and salon furnish
   Care of components of a body and car bottom
   Care of an upholstery and salon carpets
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Removal and installation of a front bumper
   Removal and installation of a rear bumper
   Removal, installation and cowl adjustment
   Removal and installation of a driving cable of an otpuskaniye of the lock of a cowl
   Removal and installation of locks of a cowl
   Removal, installation and adjustment of doors
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of door handles and lock components
   Removal and installation of regulators of window regulators of door windows
   Removal, installation and adjustment of a door of a back and its telescopic emphasis
   Removal and installation of components of the lock of a door of a back
   Removal and installation of components of the uniform lock
   Removal and installation of components of the electric drive of door window regulators
   Removal and installation of door rear-view mirrors and accompanying components
   Windscreen, glass of a door of a back and the other fixed glasses - the general information
   The top hatch - the general information
   External body furnish
   Removal and installation of seats
   Removal and installation of seat belts
   Removal and installation of elements of internal furnish of salon
   Removal and installation of the central console
   Removal and dashboard installation
   Control body sizes
+ Onboard electric equipment
+ electric equipment Schemes


ad6e8668

Removal and installation of a front bumper

Removal

 PERFORMANCE ORDER

1. Having hooked, take fastening clamps to a bumper of panels of protection of wings (loker).

2. Having hooked, remove access covers in loker of arches of forward wheels.

3. Operating through the opened openings, give bolts of fastening of a bumper.

4. Through arches of wheels turn out lateral screws of fastening of a bumper to wings.

5. From under the car turn out three bottom screws of fastening of a bumper.

6. At the corresponding complete set remove forward fog lights (address to Head Onboard electric equipment).

7. Through openings under installation of fog lights turn out back bolts of fastening of a front bumper (on one from each party).

8. Delay a bumper forward.

9. On models with the corresponding complete set do not forget to disunite contact sockets of electroconducting of fog lights.

Installation

Installation is made upside-down. At the corresponding complete set do not forget to connect electroconducting to fog lights.